World’s only Z-Wave double thermostat
FLUSH HEAT & COOL THERMOSTAT
The Qubino Flush Heat & Cool Thermostat is ideal for controlling a four-pipe fan coil unit or chilled beam with your smartphone. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.
What is it used for?
The Qubino Flush Heat & Cool Thermostat is ideal for remotely controlling a four-pipe fan coil unit or chilled beam with your smartphone.
The smallest of them all.
The Qubino Flush Heat & Cool Thermostat module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.
The Qubino Flush Heat & Cool Thermostat can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.4 W.
The Qubino Flush Heat & Cool Thermostat can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F).
The simplest installation.
Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:
- Remove the switches from the box and disconnect the wires.
- Connect the wires to the Qubino module and insert it in the box.
- Fix the switches to the box.
Incredibly fast support. Free.
We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.
The most tested and most reliable module.
Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
|Power supply||110 – 230 VAC ±10%
50 / 60 Hz, (24–30 VDC)
|Rated load current of AC output (resistive load)*||2 X 4 A / 230 VAC|
|Rated load current of DC output (resistive load)||2 X 4 A / 30 VDC|
|Output circuit power of AC output (resistive load)||2 X 920 W (230 VAC)|
|Output circuit power of DC output (resistive load)||2 X 96 W (24 VDC)|
|Power measurement accuracy||P = 0-200 W, +/-2 W
P > 200 W, +/- 3%
|Digital temperature sensor range||-50° ~ +125°C, resolution
|Digital temperature sensor cable length||1000 mm|
|Operation temperature||-10° ~ +40°C|
|Distance||up to 30 m indoors
(depending on building materials)
|Dimensions (WxHxD)||41.8 x 36.8 x 16.9 mm|
|(packaging)||(115 x 96 x 22)|
|Weight (including packaging)||48 g (64 g)|
|Electricity consumption||0.4 W|
|For installation in boxes||Ø ≥ 60 mm or 2 M|
Supported Z-Wave Frequencies
Additional parameters for pros.
There are 27 additional parameters for expert users. Some of the most useful are:
- Setting mono-stable or bi-stable switches
- Switching between normally open and normally closed input type
What do you get?
Practical blister packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.
Package dimensions (WxHxD): 115 x 96 x 22 mm
Gross weight (including packaging): 64 g