+371 28 809 700 [email protected]
Select Page

Truly universal Z-Wave DIN dimmer

DIN DIMMER

The Qubino DIN Dimmer is a DIN rail mounted dimmer for light bulbs. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

What is it used for?

The Qubino DIN Dimmer is a DIN rail mounted dimmer, ideal for remotely controlling and measuring the power consumption of light bulbs. It also supports the connection of a digital temperature sensor.

The smallest of them all.

The Qubino DIN Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino DIN Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.

Remarkably versatile.

The Qubino DIN Dimmer can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable module.

Qubino modules are “install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Power supply 110 – 230 VAC ± 10%
50 / 60 Hz*, (24–30 VDC)
Rated load current of AC output 0.85 A / 230 VAC
Rated load current of DC output 0.85 A / 30 VDC
Output circuit power of AC output (resistive load) 200 W (230 VAC)
Output circuit power of DC output (resistive load) 21 W (24 VDC)
Power measurement accuracy +/-2 W
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 18 x 93 x 58 mm
(packaging) (21 x 95 x 64 mm)
Weight (including packaging) 50 g (56 g)
Electricity consumption 0.7 W
Mounting DIN rail
Switching MOSFET (trailing edge)

*depending on order code

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHSD1 868.42 MHz
ZMNHSD2 921.42 MHz
ZMNHSD3 908.42 MHz
ZMNHSD4 869 MHz
ZMNHSD5 916 MHz
ZMNHSD8 865.2 MHz

Additional parameters for pros.

There are 17 additional parameters for expert users. Some of the most useful are:

  • Setting mono-stable or bi-stable switches
  • Automatic turning on/off output after set time
  • Saving the state of the device after a power failure

What do you get?

Practical blister packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.

Package dimensions (WxHxD): 21 x 95 x 64 mm
Gross weight (including packaging): 56 g